Owner`s manual

EdgeStar Washer/Dryer Combo 6
Installation clearances
 The location must be large enough to allow the washer door to be
fully opened.
 Additional spacing should be considered for ease of installation
and servicing. The door opens more than 90°, and it is not
reversible.
 Additional clearances might be required for wall, door, and floor
moldings.
 Additional spacing of 1 inch on all sides of the washer is
recommended to reduce noise transfer
 Make sure the combo is installed in a location where you are able
to access the electrical outlet.
Washer Dimensions:
The dimensions shown are for recommended spacing and custom undercounter installation.