Owner`s manual

EdgeStar Washer/Dryer Combo 10
Level the washer
When positioning the washer/dryer combo, please first check if the legs
are closely attached to the cabinet. If not, please turn them to their
original positions by hand or with wrench and tighten the nuts with
wrench.
After positioning the washing machine, apply pressure on each corner of
the combo in sequence. If the unit is unstable when being pressed, the
legs must be adjusted to level the machine.
Ensure the positioning status of the machine. Loosen the lock nut with a
wrench and turn the leg by hand until it closely contacts the floor. Hold
the leg with one hand and fasten the nut closely to the cabinet with the
other hand.
After being locked properly, press down on each corner of unit again to
make sure that they have been adjusted properly. If it is still unstable,
repeat steps above until unit has no give. At this time, double check by
placing a level on top surface of the unit to ensure unit is properly
adjusted.