Owner`s manual

19
Operating the Washer
Before washing clothes for the first time, the washing machine should be
run through a full cycle with detergent without articles of clothing.
Once you have loaded the washer and added laundry products, you are
now ready to wash!
Start up washing machine
Make sure the unit is connected to power and ensure water lines are
connected properly; the tap should be opened completely. Place your
already sorted wash load into the drum.
Press the “Power” button. The control panel will illuminate.
Turn the cycle selector knob to the desired cycle based on load. The LED
display panel will reflect the preset features for that cycle.
If you would like to modify any of the preset settings for the chosen cycle
press on the individual options until display panel reflects desired settings.
Available Options:
Pre-Wash Delay
Temperature Add Dry Time
Spin Speed Extra Rinse
Soil Level Custom Cycle
Note:
If you have a favorite cycle, once you modify all settings click on “custom
cycle” to remember for future cycles. Depending on cycle not all options
are available.
Press the start/pause button to begin cycle. Once cycle begins the door
will automatically lock and wash will begin. Display panel will change to
reflect estimated time and stage of wash. At any time you can pause the
cycle by pressing on the start/pause button again.