Owner`s manual

EdgeStar Washer/Dryer Combo 22
Clean inlet filter
If tap is fully opened and there is an insufficient amount of water coming
through the hose you may need to clean your Inlet filter.
Wall Connection
1. Close the tap entirely before cleaning.
2. Select any procedure on control knob and press the “Start/Pause”
button and let run for about 40 seconds.
3. Remove the inlet pipe from tap which is connected on the wall.
4. Run warm water to run through filter and reconnect inlet pipe to
hose.
Unit Connection
1. Screw off the inlet pipe from the backside of the machine.
2. Pull out the filter with long nose pliers and wash under warm water.
3. Reconnect the inlet pipe
4. Open the tap and make sure there is no water leakage.
Notes: Generally, the tap filter should be washed first and then the filter to
the washing machine.
Remove foreign matters from Coin Trap
Coin Trap can collect small objects from the wash cycle. Clean out the
coin trap regularly to ensure normal operation of washing machine
.
Step 1: Open coin trap
door
Step 2: Turn knob
clockwise
Step 3: Pull out coin trap
and remove articles
Step 4: Place drain pan
under for excess water