Owner Manual

3. Carefully turn the screwdriver clockwise to remove the two pre-installed decorative plugs

from the front of the door. Reinsert the decorative plugs into the right side of the door

using this same procedure.

4. Remove the decorative plastic cap from the top left corner of the door and insert it

into the top right corner. Do not attempt to pry up on the metal ring mounted on the

door. The cap is inside of this ring.

5. After the cap is inserted, carefully press the door gasket into its original position.

Operation

Installation Check List Before Operation

1. Have all packing materials and tape been removed from the interior and exterior of the

Wine Refrigerator?

2. Have the installation instructions been followed, including connecting the machine to

electricity? And has proper grounding been installed for the Wine Refrigerator?

3. Has the machine been leveled?

4. Is the Wine Refrigerator in a site where the ambient temperature is between 50° F and

95° F all year round?

5. Is there a clearance of at least 1- 2” at the rear, 1/4” at the top, and 1/4” at the sides for

proper air circulation?