Owner's Manual

11
Removing and Installing Decorative Plugs
Follow the instructions below to remove the decorative plugs from the door.
1. Open the door and carefully pull the door gasket from the top left corner until you have
exposed the two holes which correspond with the decorative plugs. Note: A small
Flathead screwdriver is required.
2. Insert the Flathead screwdriver through the gasket side of the door into the decorative
plug slot. You may need to use a flashlight to help guide you through this process.
3. Carefully turn the screwdriver clockwise to remove the two preinstalled decorative plugs
from the front of the door. Reinsert the decorative plugs to the right side of the door using
this same procedure.
4. Remove the decorative plastic cap from the top left corner of the door and insert it into the
top right corner.
5. After the cap is inserted, carefully press the door gasket into its original position.
Important: Before you begin, unplug the refrigerator.