Owner's Manual

8
Important Notes:
 Choose a location that has ambient temperatures above 50° F and below 95° F. Operation outside
these temperatures may result in lowered efficiency or cause other adverse effects.
 This unit MUST be installed in an area protected from the elements, e.g. wind, rain, water spray or
drips.
 The Wine Cooler should not be located next to ovens, grills, or other high heat sources.
 Do not kink or pinch the power supply cord between the Wine Cooler and the wall or cabinet.
Installation Clearance Requirements
When installing the Wine Cooler under a counter, follow the recommended spacing dimensions
shown.
 To ensure proper service access and ventilation, allow at least 1-2” of clearance at the
back,
1
/
4
” at the top, and
1
/
4
” at the sides. If the door side is against a wall, allow at least
2
3
/
8
” of clearance. The installation should allow the unit to be pulled forward for servicing,
if necessary.
 The Wine Cooler should be installed on a firm and level surface that will be able to support
the entire weight of a fully loaded unit. It is important for the Wine Cooler to be level in
order to work properly. If needed, you can adjust the height of the Wine Cooler by rotating
the feet. See the “Leveling the Wine Cooler” section.
 A standard electrical supply (115 VAC only, 60 Hz), properly grounded in accordance with
National Electrical Code and local codes and ordinances, is required.
Important Notes:
• Choose a location that has
ambient temperatures above
50°F and below 95°F.
Operation outside these
temperatures may result in
lowered efficiency or cause
other adverse effects.
• This unit MUST be installed
in an area protected from the
elements, e.g., wind, rain,
water spray or drips.
• The Wine Cooler should not
be located next to ovens,
grills or other high heat
sources.
• Do not kink or pinch the
power supply cord between
the Wine Cooler and wall or
cabinet.