Owner's Manual

14
Operation
Installation Checklist before Operation
Using the Temperature Control Panel
1. Have all packing materials and tape been removed from the interior and exterior of the refrigerator?
2. Have the installation instructions been followed, including connecting the machine to electricity?
And has proper grounding been installed for the refrigerator?
3. Has the machine been leveled?
4. Is the refrigerator in a site where the ambient temperature is between 50° F and 90° F all year
round?
5. Is there a clearance of at least 2” at the rear, 1/2” at the top, and 1/2” at the sides for proper air
circulation?
The refrigerator has a temperature range from 40°F to 65°F and will display the set temperature.
LAMP Button: Press this button to turn the interior light on and o󰀨.
SET Button: Press this button to select the desired temperature. The display will advance
through the available temperature settings in increments of 1° F.
LAMP SET
°F
The control panel will automatically display the set temperature. To view the current room
temperature, press and hold the SET button for 3 seconds and the display will show the
current actual temperature. To switch the display back to the set temperature, press the
SET button again.
Notes:
• It is normal for the set temperature and current temperature to be a few degrees
di󰀨erent from each other.
• Allow at least 24 hours before storing your wines to allow the temperature to acclimate.