Owner's Manual

Operation

Installation Checklist before Operation

Using the Temperature Control Panel

1. Have all packing materials and tape been removed from the interior and exterior of the kegerator?

2. Have the installation instructions been followed, including connecting the machine to electricity?

And has proper grounding been installed for the kegerator?

3. Has the machine been leveled?

4. Is the kegerator in a site where the ambient temperature is between 50° F and 90° F all year

round?

5. Is there a clearance of at least 1- 2” at the rear, 1/2” at the top, and 1/4” at the sides for proper air

circulation?

The kegerator has a temperature range from 32°F to 60°F and will display the set temperature.

Power Button: Press and hold for approximately 3 seconds to turn the unit on or o󰀨.

Up Button: Press to increase the temperature by 1 degree increments.

Down Button: Press to decrease the tempreature by 1 degree increments.

Light Button: Press the button to turn the inner light on or o󰀨.

Run Light: When lit, the unit is in cooling mode.

Celsius/Fahrenheit Light: The Celcius or Fahrenheit light will be lit depending on which

temperature type is being displayed. To switch between C and F press and hold both the

Up and Down buttons simultaneously for approximately 3 seconds. A beep will occur and

the indicator light will illuminate next to desired temperature setting.