Use and Care Manual

13
Installation Requirements
Once an opening is created in the countertop the next step is to install the cabinet. When
installing the kegerator under a counter, follow the recommended spacing dimensions shown
below.
 Make sure the top cover, guard rail, drip tray, and installation pegs are NOT installed on
the top of the cabinet. These items will create an obstacle for the cabinet to be installed
under counter.
 Move the kegerator so the opening on the top of the cabinet is aligned with the opening
in the counter.
 The kegerator should be installed on a firm and level surface that will be able to support
the entire weight of a fully loaded unit. It is important for the kegerator to be level in
order to work properly. If needed, you can adjust the height of the kegerator by rotating
the feet. See the “Leveling the Kegerator” section.
 A standard electrical supply (115 VAC only, 60 Hz), properly grounded in accordance
with National Electrical Code and local codes and ordinances is required.