- Edimax Fast Ethernet MFP Server User's Manual

5.1 Printing

The MFP will be added to “Printers and Faxes” in the Windows after the MFP

is installed. When you connect to the MFP by clicking “Connect” in the “MFP

Manager”, the MFP Server will create the connection between the MFP and

your computer and then you can print a document just follows the same steps

as usual.

Tip: If you have sent a printing job to the MFP while the MFP is connecting

by a user, you may be prompted that the device is not found or the document

is failed to print. Please resend the printing job after the MFP is idle or not

being connected by the other user.