- Edimax Fast Ethernet MFP Server User's Manual

33
6.3 Auto Connect List
To let the system connect the MFP server automatically when you want to
print a document just like using traditional print server, you can add the MFP
into your Auto Connect List. The system will send the printing jobs to the MFP
when the MFP Server is idle and not being connected.
Tip: If you send a printing job to the MFP while the MFP is connecting by the
other user, you may be prompted that the device is not found or the document
is failed to print. It also happens in some MFPs or printers even though the
MFP is not connecting by a user. Please follow the message to retry and the
MFP will queue your printing job in your computer spooler. The MFP Server
will then print the job after the MFP is idle or disconnected.
To add the MFP to the Auto Connect List, please follow the steps below.
1. Click “Add” from the “Auto Connect List”.