Operation Manual

32
2.2 WAN
Use the WAN Settings screen if you have already configured the Quick Setup Wizard section and
you would like to change your Internet connection type. The WAN Settings screen allows you to
specify the type of WAN port connect you want to establish with your ISP. In the WAN Settings
screen you can also specify the router to act as a Bridge. The WAN settings offer the following
selections for the router’s WAN port, Dynamic IP, PPPoE, PPTP, Static IP Address, Bridge,
DNS and DDNS.
Parameters Description
2.2.1 Dynamic IP address Your ISP will automatically give you an IP address
2.2.2 Static IP address Your ISP has given you an IP address already
2.2.3 PPPoE Your ISP requires PPPoE connection.
2.2.4 PPTP Your ISP requires you to use a Point-to-Point Tunneling
Protocol (PPTP) connection.
2.2.5 L2TP Your ISP requires L2TP connection.
2.2.6 Telstra Big Pond Your ISP requires Telstra Big Pond connection.
2.2.7 Bridge The router can be used as a bridge between LANs