Datasheet

www.edimax.com
Long Range 8-Port Fast Ethernet Switch with 4 PoE+ Ports & DIP Switch
ES-1008PHE V2
PoE
Distance
200M
802.3at
30W
802.3af
15.4W
8-Port Fast Ethernet Switch with 4 PoE+ Ports & DIP Switch
1
10/
100M
Fan-
Less
VLAN
QoS
Introduction
The Edimax ES-1008PHE V2 is a Long Range 8-Port Fast Ethernet switch with 4 PoE+ Ports designed for use in
home, small or medium sized network environments. With four DIP switches, PoE ports can be manually set
with on/off control, extending PoE delivery distance up to 200 meters and port-based on/off control for VLAN
and QoS is also supported. The switch easily connects and supplies power to PoE-enabled devices such as
wireless access points, network cameras and IP phones as well as other Ethernet-enabled devices such as
computers, printers or network attached storage (NAS). The compact size and fan-less design make the switch
an ideal solution for expanding home and small business networks.
Power over Ethernet (PoE+) Auto Detection
Features eight IEEE 802.3at Power over Ethernet (PoE+)
ports which supply up to 30 watts of electricity per port.
It can convert standard 100‐240V AC power into
low‐voltage 50 - 57V DC electricity to power IEEE 802.3at
compliant network accessories via existing LAN cables.
With PoE detection capability, the ES-1008PHE V2 is able
to verify whether the connected device is IEEE 802.3at
compliant. In the event that a PoE device is not detected,
only network data will be transmitted through the LAN
cable – meaning easy setup and management of network
devices such as access points and network cameras.
*IP Phone: 3- 7W, IP Camera: 7- 10W PZT Camera: 15 -25+ W
*Access Point: 8W for 802.11a/g radios; upwards of 20W for 802.11n radios
The guidelines are meant to provide general estimates for power consumption. Actual power requirements vary and should
be confirmed for each model when determining your PoE budget requirements.
1