User`s manual

User Manual
Publication date: July, 2006
Revision A2
25
3. Operation of
Web-based Management
This chapter instructs you how to configure and manage the switch through
the web user interface it supports, to access and manage 24 10/100Mbps TP Port
and 2 Gigabit TP/SFP or TP/GBIC Fiber dual media port. The switch provides 24
fixed Fast Ethernet TP ports and two optional Gigabit dual media ports supporting
either fiber or TP media. With this facility, you can easily access and monitor
through any one port of the switch all the status of the switch, including MIBs status,
each port activity, multicast traffic, and so on.
The default values of Web-Smart Switch are listed in the table below:
IP Address
192.168.1.1
Subnet Mask
255.255.255.0
Default Gateway
192.168.1.254
Username
admin
Password
admin
Table 3-1
After the switch has been finished configuration, you can browse it by using
the IP address you set up. For instance, type
http://192.168.1.1 in the address row
in a browser, it will show the following screen (see Fig.3-1) and ask you inputting
password in order to login and access authentication. The default password is
“admin”. For the first time to use, please enter the default password, then click the
<Login> button. The login process now is completed.
In the switch, it supports a simple user management function allowing only
one administrator to configure the system at the same time.
To optimize the display effect, we recommend you use Microsoft IE 6.0
above, Netscape V7.1 above or FireFox V1.00 above and have the resolution
1024x768. The switch supported neutral web browser interface.
In Fig. 3-2, for example, left section is the whole function tree with web user
interface and we will travel it through this chapter.