Operation Manual

5
C. In Windows XP, there is a “Windows Zero Configuration Tool” for you to setup wireless cards. You
can choose to configure the card through the Zero Configuration Tool or the Configuration Tool for
the card. It is recommended to choose the Configure Tool for the card. Click “Next” to continue.
D. If you need the card to operate with better performance, please choose the “Optimize for
performance” to enable the Tx Burst mode. Or you can choose “Optimize for Wi-Fi mode” to let the
card run in standard wireless network.
E. The system starts to install the software of the card. Follow the instruction of the program to plug in
the PC card into the Cardbus slot of your laptop computer.