Datasheet

GS-5416PLC
Maximum performance, actual data rates, and coverage will vary depending on network conditions and environmental factors. Product specifications and design are subject to change without notice.
Copyright © 2018 Edimax Technology Co. Ltd. All rights reserved.
www.edimax.com
Long Range 16-Port Gigabit PoE+ Web Smart Switch
with 4 RJ45/SFP Combo Ports
The Edimax Pro GS-5416PLC smart switch comes with web-based user interface, 16 Gigabit PoE+ ports and 4
RJ45/SFP combo ports for high-speed Gigabit and long-range copper or optical connections. With smart features in
SNMP v3, PoE PD Alive Check, Dual Firmware, Voice VLAN, DHCP Snooping, QoS, CoS, STP, 802.1Q VLAN,
IPv4/IPv6, Port Trunk, IGMP v1/v2/v3 Snooping and Mirror, the smart switch provides a cost effective, reliable, scalable
and secure switch solution for SMB networks. The Edimax-specific long range mode enables power and data
transmission to up to 200 meters at a speed of 10Mbps, tailored for IP cameras and far away network device
applications. The PoE also features auto detection and power backfeed protection to efficiently provide power and, at the
same time, avoid damaging the PoE ports. The Edimax GS-5416PLC is the ideal solution to increase the distance/speed
of your network server and backbone connections.
Gigabit High-Speed Connection
Complies with IEEE802.3/802.3u/802.3ab/802.3z Gigabit Ethernet Standards, the GS-5416PLC features 16 Gigabit
Ethernet ports for high-speed, large file transfer and 4 SFP slots for long range optical fiber Gigabit Ethernet connections.
802.3at PoE with Auto Detection & Power Backfeed Protection
The GS-5416PLC features 24 IEEE 802.3at Power over Ethernet (PoE+) ports which supply up to 30W of electricity per
port and has a total power supply of 330W (can provide 280W for PD)to power any 802.3at or 802.3af compliant power
device. With PoE detection capability, the GS-5416PLC is able to verify whether the connected device is IEEE 802.3at
or 802.3af compliant. If a PoE device is not detected, only network data will be transmitted. Moreover, with the PoE
power backfeed protection from the passive PoE injectors, the GS-5416PLC is able to avoid damaging the PoE ports.
PoE for Easy Installation and Better Cost Efficiency
Power over Ethernet technology enables the Ethernet cable to carry both data and power, reducing cable installation
and eliminating the need for extension cords or electrical outlets on the walls and ceiling. The GS-5416PLC can
effectively lower installation costs and simplify deployment effort. The GS-5416PLC can be used with different PoE
products such as access points, IP cameras or VoIP devices and is an effective solution for network environments
where power outlets are difficult to access.
PoE Powered Device Alive Check
Featuring PoE Powered Device (PD) alive check, the switch can be configured to monitor real-time status of connected
PDs by ping action (sending alive-checking packets). If a PD fails to response, the GS-5416PLC PoE Switch will reboot
the PD, which enhances the reliability of the network and reduces administrator management burden.