USB Audio Interface/ MIDI Keybroad Controller PC-80 Owner's Manual
Table Of Contents
- USING THE UNIT SAFELY
- Important Notes
- Contents
- Contents of the package
- Names of things and what they do
- Setup
- Operation
- Appendix
- Using the PC-80 as a MIDI controller keyboard
- Basic connection example and signal flow
- The PC-80’s basic operating modes
- Transmitting various MIDI messages from the PC-80
- Setting the MIDI transmit channel
- Selecting sounds—Transmitting Program Change and Bank Select Massages
- Starting/stopping playback data—Transmitting a Start/Stop/Continue message
- Transmitting messages to an external MIDI sound module
- Setting the split points
- Using the VALUE encoder to transmit values for a specified parameter
- Using the PC-80 as a MIDI interface
- Using the PC-80 as an audio interface
- System settings for the PC-80
- PC-80 driver settings
- Troubleshooting
- Driver-related problems (Windows)
- Can’t record or play back audio or MIDI/No sound
- Noise or pops are heard when recording/playing on your computer
- Noise or distortion occurs when the PC-80 is not connected to your computer
- The sound is too weak
- Problems with the PC-80 Software Synthesizer
- Won’t start up
- The menu does not appear correctly (can’t select it)
- No sound
- Sound is too loud/too soft
- Clicks, pops, or noise occurs in the sound
- Sounds you play from the keyboard are delayed
- Can’t control sounds or parameters from the PC-80
- Can’t play back song data/Playback is incorrect
- Can’t use the PC-80 software synthesizer from other software
- Uninstalling the PC-80 software synthesizer
- MIDI implementation
- Main specifications
- Index
- Using the PC-80 as a MIDI controller keyboard
49
Recording your performance in sequencer software (SONAR LE)
4
In the
PC-80 software CD-ROM
, navigate to the
SONAR Instrument
Definition
folder, specify the
“EDIROL PC-80 (.ins)”
instrument definition
file, and click
[Open]
.
5
The
Import Instrument Definitions
dialog box will appear, and a list of
the instrument definitions in the
instrument definition file will appear.
In this list, select
“EDIROL PC-80”
and click
[OK]
.
6
In the
Define Instruments and Names
dialog box, click the
[Close]
button
to close the dialog box.
Now the
Assign Instruments
dialog box will show the imported instrument
definitions.
■
Specifying the PC-80 instrument definition
7
In the
Output/Channel
field, select all items from EDIROL PC-80 Player /1
through EDIROL PC-80 Player /16. (To select all of these, click EDIROL PC-
80 Player /1, and then hold down the Shift key and click EDIROL PC-80
Player /16.)
8
In the list of
Uses Instrument
, choose
“EDIROL PC-80.”
9
Click
Output/Channel
and
Uses Instrument
. A black line
will appear, indicating that
these have been associated.
10
Click
[OK]
to close the dialog box.
PC-80_e.book 49 ページ 2005年11月10日 木曜日 午前11時34分