User Manual

EFCO CORPORATION 2/11/2013 PART NO. YW44 Page 20 of 34
5XPT SLIDING GLASS DOOR INSTALLATION INSTRUCTIONS
1. Locate frame head (1D04), sill (1D05), and jambs (1D06). Locate head corner gaskets
(H10B) and sill corner gaskets (H10C). Locate the SLQ9 (#10-16 x 1” PH-SMS 410 A pt
MG) assembly screws. (See Fig. 1)
2. The corner gaskets have a pressure sensitive adhesive on one side. Pull off the paper
backing, align the pre-punched holes with the fabricated holes in the jamb and adhere to the
jambs.
Head (1D04) shown
Sill
(
1D05
)
not shown
H10B Head Corner Gasket shown
H10C Sill Corner Gasket not shown
Jamb (1D06)
EXTERIOR
Fig.1