User Manual

EFCO CORPORATION 6/8/2012 PART NO. YW44 Page 26 of 34

5XPT SLIDING GLASS DOOR INSTALLATION INSTRUCTIONS

See Fig. 8 for Steps A and B below (operable jamb to threshold):

Step A. The full length sealant across the sill at the threshold will need to wraparound the

weather-strip leg to the jamb.

Step B. Marry a vertical seal to the sealant across the sill and seal the joint between the weather-strip

leg and threshold. This seal joint will follow the underneath profile of the threshold and fill the

gap between both the horizontal and vertical weather-strip. All sealant joints must be

continuous with one another and tooled with no voids.

See Fig. 9 for Steps C and D below (fixed jamb to fixed panel):

Step C. The full length sealant across the sill at the fixed panel will need to wraparound the weather-

strip leg to the jamb.

Step D. Marry the full length sealant up the jamb with the sealant across the sill. This sealant will

marry with the sealant at the head. All sealant joints must be continuous with one another

and tooled with no voids.

All sealant must be continuous with

one another and tooled with no

voids.

All sealant must be continuous with

one another and tooled with no voids.

FIXED

PANEL

FIXED

JAMB

SILL

THRESHOLD

Full length sealant up jamb

Full length sealant across sill

Fig. 8

Fig. 9

Weather-strip leg

Weather-strip Leg