Use and Care Manual

56V LITHIUM-ION CORDLESS SNOW BLOWER — SNT2100 27
2. Turn the snow blower on its side
(Fig. 24).
3. To reduce the risk of injury, wear
gloves. Use a 4mm hex wrench
(not included) to remove the 5 bolts
(Fig. 24). Detach the worn scraper
bar from the snow blower (Fig. 25).
4. Install the new scraper bar and
fasten it securely to the snow
blower with the 5 bolts (Fig. 24).
25
24
Bolt
Scraper Bar