Use and Care Manual

ManualsBrandsEGO ManualsCordless Snow Blowers21 in. 56-Volt Lithium-Ion Single Stage Electric Snow Blower with (2) 5.0 Ah Batteries

56V LITHIUM-ION CORDLESS SNOW BLOWER — SNT2100 29

2. Use needle nose pliers (not included)

to remove the spring from the

hook to release the belt tension

(Fig. 30 & 31).

3. Remove the drive belt by

slowly turning the auger pulley

counterclockwise while pulling the

belt outwards (Fig. 32).

4. Install the new drive belt, rotating it

onto the pulleys (Fig. 33).

Tips: Rotate the new drive belt rst

around the engine pulley, then the idle

pulley, and nally around the auger pulley.

Slowly turn the auger pulley clockwise to

drive the belt inwards (Fig. 29).

5. Use needle nose pliers to install the

spring onto the hook to tension the

drive belt (Fig. 30).

6. Reinstall the drive belt cover with the

8 Torx screws removed in step 1

(Fig. 28).

29

Auger Pulley

Idler Pulley

Spring

Engine

Pulley

Drive Belt

Hook

32

31

33

30

Needle nose pliers