Use and Care Manual

56-VOLT LITHIUM-ION CORDLESS 15" STRING TRIMMER22

ADJUSTING CUTTING

LINE LENGTH

The trimmer head allows the operator to

release more cutting line without stopping

the motor. As line becomes frayed or worn,

additional line can be released by lightly

tapping the bump knob on the ground

while operating the trimmer (Fig. 13).

WARNING:

Do not remove or alter

the line cutting blade assembly. Excessive line length will cause the motor to overheat

and may result in serious personal injury.

For best results, tap the bump knob on bare ground or hard soil. If line release is

attempted in tall grass, the motor may overheat. Always keep the trimming line fully

extended. Line release becomes more difﬁcult as the cutting line becomes shorter.

LINE REPLACEMENT

NOTICE: Always use the recommended nylon cutting line with a diameter that does not

exceed 0.095 in. (2.4 mm). Using line other than that speciﬁed may cause the string

trimmer to overheat or become damaged.

WARNING:

Never use metal-reinforced line, wire, or rope, etc. These can break

off and become dangerous projectiles.

WARNING:

To prevent serious personal injury, remove the battery pack from the

tool before servicing, cleaning, changing attachments or removing material from the

unit.

1. Remove the battery pack.

2. Rotate the spool retainer in the

arrow direction as necessary to

align the LOAD line on the spool

retainer with the eyelets in the spool

base (Fig. 14).

LOAD Line

Eyelet Arrow Direction