Use and Care Guide

56-VOLT LITHIUM-ION CORDLESS 15" STRING TRIMMER—ST1520 & ST1520S 15

MOUNTING THE GUARD

WARNING:

Always wear gloves when mounting or replacing the guard. Be careful

of the blade on the guard and wear gloves to protect your hands from being injured by the

blade.

1. Remove the battery pack from the

trimmer.

2. Lay the trimmer on the ground or

the oor with the trimmer head

facing upward.

3. Align the two bolts, which are

preassembled on the guard, with

the two screw holes in the shaft

(Fig. 4), and then tighten them with

the supplied hex wrench (Fig. 5).