Use and Care Guide

ManualsBrandsEGO ManualsCordless String Trimmers56-Volt Lith-ion Cordless Electric 15 in. Powerload String Trimmer with Carbon Fiber Shaft Kit

56-VOLT LITHIUM-ION CORDLESS 15" STRING TRIMMER—ST1520 & ST1520S24

RELOAD THE CUTTING LINE

NOTICE: When the cutting line breaks

from the eyelet or the cutting line is

not released when the trimmer head

is tapped, you will need to remove the

remaining cutting line from the trimmer

head and follow the steps below to reload

the line.

1. Remove the battery pack from the

trimmer.

2. Press the release tabs on the

trimmer head and remove the lower

cover assembly of the trimmer head

by pulling it straight out

(Fig. 18a & 18b).

3. Remove the cutting line from the

trimmer head.

4. Insert the spring into the slot in the

lower cover assembly (Fig. 19).

5. With one hand holding the trimmer,

use another hand to grasp the lower

cover assembly and align the slots

in the lower cover assembly with the

release tabs. Press the lower cover

assembly until it snaps into place, at

which time you will hear a distinct

click sound (Fig. 20).

6. Follow the instructions in the “LINE

REPLACEMENT” section to reload

the cutting line.

18b

①

②

18a

Lower Cover

Assembly

Release Tab

19

Spring

20

Release

Tab

Slot