Use and Care Guide

56-VOLT LITHIUM-ION CORDLESS 15" STRING TRIMMER—ST1520 & ST1520S26

Remove the trimmer head

1. Remove the battery pack from the

trimmer.

2. Press the release tabs on the

trimmer head and remove the lower

cover assembly of the trimmer head

by pulling it straight out

(see Fig. 18a & 18b).

3. Remove the cutting line from the

trimmer head (Fig. 22).

4. Take the spring out of the spool

assembly, if necessary. Save it for

reassembly.

5. Wear gloves. Use one hand to grasp

the spool assembly to stabilize it,

and use the other hand to hold an

impact wrench (1/2”, 13mm) to

loosen the nut in a counterclockwise

direction (Fig. 23).

6. Remove the nut, washer, spool assembly and upper cover from the motor shaft

(Fig. 24).

Upper Cover

Washer

Nut

Spool Assembly

Impact Wrench