Trimmer Operator's Manual

56-VOLT LITHIUM-ION CORDLESS 15" BRUSHLESS STRING TRIMMER โ€” ST1530/ST1530-FC28
NOTICE: If the trimmer head does not
advance the cutting line when it is tapped
on the ground during trimming, follow the
section "Remove the trimmer head"
to take down the lower cover assembly
and disassemble it as Fig. 27 shown.
Thoroughly clean the accumulated grass
between the lower cover and housing.
SHARPEN THE LINE-CUTTING
BLADE
WARNING:
Always protect your hands by wearing heavy gloves when
performing any maintenance on the line-cutting blade.
1. Remove the battery.
2. Remove the line-cutting blade from the guard.
3. Secure the blade in a vise.
4. Wear proper eye protection and gloves and be careful not to cut yourself.
5. Carefully ๎˜Ÿle the cutting edges of the blade with a ๎˜Ÿne-tooth ๎˜Ÿle or sharpening
stone, maintaining the original cutting edge angle.
6. Replace the blade on the guard and secure it in place with the two screws.
27
Screw
Connector
Lower Cover
Housing
Lower Cover Assembly