Installation & Assembly

ASSEMBLY INSTRUCTION
Eichholtz B.V. l Delfweg 52 l 2211 VN Noordwijkerhout l P.O. Box: 23, 2160 AA Lisse l The Netherlands l www.eichholtz.com
1
Two people are required for safe mounting of this luminaire.
Turn off the electricity supply at the main circuit panel before installing. Do
not connect the electricity supply until your luminaire is fully assembled
and installed.
Fix the ceiling bracket (A) to the ceiling by using mounting plugs and
screws suitable to your ceiling type.
Remove the lamp from the carton by lifting the bar. Hold the luminaire in
the air while removing the protective packaging materials. Do not place the
luminaire the luminaire on a table, floor etc as it might cause it to break.
Hold the lamp in an elevated position in such a way that the wires can
freely reach the ceiling junction box.
Thread the wires through the components (suspension eye (D), retaining
nut (C), ceiling canopy (B)) and connect the 3 power wires according to
their colours . Brown is the live wire, blue is the neutral wire, green/yellow
is the earth wire.
Screw the suspension eye (with retaining nut attached) to the ceiling
bracket and fix it securely by tightening the retaining nut.
Check whether the connection is sufficiently strong by manually loading
the chain. Carefully lower the lamp until the chain is taut. Straighten the
chain links.
ZOOM
108979 CHANDELIER MURANO
A
B
C
D
CEILING
CARE INSTRUCTION
Wipe clean with soft, dry cloth.
Always avoid the use of harsh chemicals or abrasive cleaners as they may
cause damage to the fixture’s finish.