Installation & Assembly

ASSEMBLY INSTRUCTION
Eichholtz B.V. l Delfweg 52 l 2211 VN Noordwijkerhout l P.O. Box: 23, 2160 AA Lisse l The Netherlands l www.eichholtz.com
111974 CHANDELIER SALVIA
1 4
52
3 FINAL
Turn-off the electricity supply at main circuit panel before installing.
Do not connect electricity supply until your ceiling light is fully assembled
and installed.
CARE INSTRUCTION
Wipe clean with soft, dry cloth.
Always avoid the use of harsh chemicals or abrasive cleaners
as they may cause damage to the fixture’s finish.
Determine the desired height of your chandelier and connect the
extension pipes.
Thread the wire from the lamp through the pipe.
Fix the ceiling plate (A) to the ceiling by using mounting plugs and
screws suitable to your ceiling type. Guide the wires through the plate.
Place or hold the lamp in an elevated position in such a way that the
wires can freely reach the ceiling junction box.
Slide the glass over the lampholder. While holding the glass in place slide
the metal sleeve over the lampholder and secure it with the ring.
Connect the 3 power wires according to their colours. Brown is the live
wire, blue is the neutral wire, green/yellow is the earth wire.
Place the ceiling canopy (B) flush against the ceiling and fix it securely
with the two nuts supplied.