Installation & Assembly

ASSEMBLY INSTRUCTION
Eichholtz B.V. l Delfweg 52 l 2211 VN Noordwijkerhout l P.O. Box: 23, 2160 AA Lisse l The Netherlands l www.eichholtz.com
1
6
Turn-off the electricity supply at main circuit panel before
instal
ling. Do not connect electricity supply until your ceiling light
is fully assembled and installed.
Determine the desired height of your chandelier and connect the
extension pipes.
2
Fix the ceiling plate (A) to the ceiling by using mounting plugs and
screws suitable to your ceiling type. Guide the wires through the plate.
Place or hold the lamp in an elevated position in such a way that the
wires can freely reach the ceiling junction box.
P
lace the bulbs.
4
Connect the 3 power wires according to their colours. Brown is the live
wire, blue is the neutral wire, green/yellow is the earth wire.
Place the ceiling canopy (B) flush against the ceiling and fix it securely
with the two nuts supplied.
887
Place the glass lampshade over the lampholder by tilting it around the
gap in the plate and rotating it.
Align the glass lampshade with the lamp holder.
Fix
the glass by tightening the nut.
113251 CHANDELIER SPACE