Use and Care Manual

Page 3 of 5
EIGHT DOORS CORP.
e-mail: doors@eightdoors.com
Website: EightDoors.com
Choose any paint indicated for WOOD APLICATION that suits your taste and apply it according to the paint
manufacturer instructions; our door are primed with a water-based primer. Be sure that previous layer of paint coat is
completely dry before applying the next one. Cover all surfaces evenly! BE SURE TO SEAL TOP AND BOTTOM of doors,
as well as all sides. Apply a minimum of two top coats, sanding between coats.
MAINTENANCE & CLEANING RECOMMENDATIONS
It is recommended to clean the door twice a year (monthly in coastal areas) with a damp cloth and mild soap.
Do not power-wash doors or use a garden hose. This can cause seal failure and allow water to enter the structure.
Do not use sharp objects and/or abrasive cleaners, it can damage door surfaces.
Do not allow aggressive cleaners or solvents to come in contact with door surfaces. Immediately rinse and dry it.
Conditions of Sale
EightDoors will not be held responsible for any incidental work or expenses as a result of bad handling or
incorrect fitting and finishing;
EightDoors is not responsible for any other finishing applied to the door;
No claim will be entered into if the door has not been correctly machined, finished and installed in accordance
with USE AND CARE INSTRUCTIONS. All doors must be properly sealed on all six surfaces.
The conditions under which this door is stored, installed and sealed are beyond the manufacturer control and
therefore we cannot accept responsibility for or warranty against shrinkage, warping or splitting without
inspection and statement from EightDoors’s technical team.
We strongly advise against use in following locations:
Freshly plastered location;
Dwellings where concrete floors have recently been laid;
A new build where central heating is used to accelerate the drying out process;
Should this door be used in one or more of above locations we cannot accept any responsibility whatsoever for
problems arising.