Operation Manual

9. Troubleshooting

Fault Cause Remedy

Engine does not start Automatic oil cut-out has not

responded

Spark plug fouled

No fuel

Check oil level, top up engine oil

Clean or replace spark plug

(electrode spacing 0.6 mm)

Refuel / have the petrol cock

checked

Generator has too little or no

voltage

Controller or capacitor defective

Overcurrent circuit-breaker has

triggered

Air filter dirty

Contact your dealer

Actuate the circuit-breaker and

reduce the consumers

Clean or replace the filter

Anleitung_BT_PG_2800_SPK7:_ 20.01.2010 9:57 Uhr Seite 16