Manual

Page 14 of 18
Drawing : - TPC262
Issue : - 8
Date : - 10/12/13
Assembly Instructions:
With reference to the table above unpack the Mounting Frame Kit and check
for completeness.
With reference to Drawing 1027301 Assemble the mounting frame as follows:-
1. Using Items 8, 9, 10, 11 assemble Items 4 and 5 ensuring the edge of
the foot is flush with the end of Item 4.
2. Using Items 8, 9, 10, 11 assemble Items 5 and 3 ensuring the distance
of 900mm +/- 2mm is maintained over Items 4.
3. Using Items 8, 9, 10, 11 assemble Items 1, 4 and 6 ensuring the front
edges are flush.
4. Insert Item 12 into the front of the ‘U’ Channel.
5. Drill the appropriate fixing holes into Item 3 to secure bracket onto the
wall.
6. Secure the bracket to the wall
7. With reference to Drawing 5060117 Position the CD100 / CD100E
onto the Wall Mounted Bracket.
8. Using Item 6 assemble items 1 and 2 ensuring the fingers of Item 2
locate into the CD100 chassis.
9. Secure the CD100 / CD100E with the 2 Claw Clamps onto Item 1.