Manual

Drawing : - TPC430
Issue : - 3
Date : - 30/11/16
IF YOUR RF3500 FAILS TO OPERATE
1. Check that the plug is fully pushed into the socket and is switched on.
2. Check with some other electrical device that the wall socket is “live”. If it is not, contact a qualified electrician.
Should the above remedies not work, then disconnect from the mains. Contact your supplier. DO NOT attempt to
repair the unit or unscrew the outer casing.
WARNINGS
• This appliance can be used by children from 8 years and above and persons with reduced physical, sensory or
mental capabilities or lack of experience and knowledge if they have been given supervision or instruction
concerning use of the application in a safe way and understand the hazards involved.
• Children shall not play with the appliance .
• This machine should be serviced by qualified Ebac personnel or other persons having technical competence
servicing refrigeration equipment following the instructions in the Ebac service manual.
• Ebac service manuals and spares lists are available upon request by contacting your local Ebac distributor.
• Never operate the unit in a bathroom or swimming pool area
• Do not use the machine if the power cord or case are damaged.
• Do not poke objects into any of the grilles on the machine.
• Do not cover or obstruct the air inlet or outlet.
• This machine complies with the electromagnetic compatibility 1992 regulations.
• This machine has been manufactured in the United Kingdom.
• This appliance can be used by children from 8 years and above and persons with reduced physical, sensory or
mental capabilities or lack of experience and knowledge if they have been given supervision or instruction
concerning use of the application in a safe way and understand the hazards involved. Children shall not play
with the appliance. Cleaning and user maintenance shall not be made by children without supervision.
• Ensure that the fan is switched off from the supply mains before removing the guard.
• If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified
persons in order to avoid hazard.