User`s manual

Chapter 1 Introduction

Remote Control

1 POWER Turns the power on or off.

INPUT

SELECT

PC Switches to PC input.

VIDEO Switches to video input.

3 VOLUME

Displays the volume adjustment menu to volume up or

down.

4 MENU

• Displays/Exits the OSD menu.

• Pressing the button while the OSD menu is

displayed returns you to the previous menu status.

5 RETURN

Pressing the button while the menu is displayed

returns you to the previous menu status.

∧ / ∨ / ＜ / ＞

• Used to: select the OSD menu tab; select the set

value; or to increase/decrease the adjustment value.

• Pressing

or while the OSD menu is not

displayed allows you to adjust the brightness of the

backlight.

7 ENTER

Used to x the setting or adjustment items in each

menu.

8 MODE Switches the gamma setting.

Before Using Remote Control

●

How to install batteries

1 While pushing the tab toward the arrow (1), pull

out the battery case (2).

(1)

(2)

2 Insert a battery with the positive side up.

(Battery model number: CR2032)

3 Insert the battery case until it clicks.

●

Receivable Range of Remote Control

Use the remote control inside of the range as below.

30°