Spec Sheet

ELAC OW-V41L / OW-V41S ON-WALL Speakers | www.elac.com | Page 5

Installing and Removing the Grills

The mesh grills of your Debut speakers are designed to be removable if desired. To remove it, hold the top or

bottom edges of the grill close to the mounting points and pull gently. To replace the grill, align the pegs on the

grills with the holes on the speaker and press in gently.

On-Wall Speaker Setup

The Elac OW-V41L and OW-V41S on-wall speakers are designed to be mounted on the wall.

The OW-V41L and OW-V41S can be used in dierent conﬁguration, depending on your home audion system.

Further more, two pieces of OW-V41L can be combine with one piece of OW-V41S to create a 2.1 speaker audio

system.

We highky suggest that a profesional installer performs the instalation of the on-wall speakers. Dierent wall

materials require dierent types of mounting hardware.

Typical placement solutions for OW-V41L and OW-V41S on-wall speakers are shown in Fig.4 and Fig.5.

Wall mounting screws are not provided.

Typical Placement for OW-V41L (left and right channel) and OW-V41S (center channel) On-Wall Speakers

Typical Placement for OW-V41S (left and right channel) On-Wall Speakers

Fig.4

Fig.5