VANITY MODEL #83571 Français p. 10 ATTACH YOUR RECEIPT HERE Serial Number Purchase Date Questions, problems, missing parts? Before returning to your retailer, call our customer service department at 1-855-226-7169, 8 a.m. - 4 p.m., EST, Monday - Friday.
PACKAGE CONTENTS E G A B C D F J H I PART A B C D E DESCRIPTION 6-Bead Crystal String 7-Bead Crystal String 8-Bead Crystal String 9-Bead Crystal String Canopy QTY 6 6 6 6 1 PART F G H I J 2 DESCRIPTION Mounting Bracket Mounting Surface 40-Watt G9 Bulb Bulb Cover Socket QTY 1 1 5 5 5
HARDWARE CONTENTS AA Wire Connector Qty: 3 BB Short Machine Screw Qty: 2 CC DD Canopy Screw Qty: 4 Anchor Qty: 4 EE Anchor Screw Qty: 4 SAFETY INFORMATION Please read and understand this entire manual before attempting to assemble, operate or install the product. • • • • • WARNING IMPORTANT: NEVER attempt any work without shutting off the electricity. Go to the main fuse box, or circuit breaker, in your home.
ASSEMBLY INSTRUCTIONS 1. Temporarily raise mounting bracket (F) to wall. Mark location for anchor (DD). Use 9/32 size drill to drill holes for anchor (DD). Insert anchor (DD) into hole. 1 Wall F Hardware Used x4 DD Anchor DD 2. Connect the mounting bracket (F) to the outlet box (not included) with short machine screws (BB). 2 Outlet Box Arm BB Hardware Used BB Short Machine Screw F x2 3. Screw anchor screws (EE) through mounting bracket (F) and into anchors (DD).
ASSEMBLY INSTRUCTIONS 3. Wire connection guide: Ground wire: • For installation in the United States: Wrap ground wire from outlet box around ground screw preassembled on mounting bracket (F) no less than 2 in. from wire end. Tighten ground screw. If fixture is supplied with a ground wire, connect to outlet ground wire with a wire connector (AA). • For installation in Canada: If fixture is supplied with ground wire, wrap ground wire around ground screw on mounting bracket (B). Tighten ground screw.
ASSEMBLY INSTRUCTIONS 5. Insert 40-watt max. G9 bulb (H) into socket (J). Screw bulb cover (I) onto socket (J). 5 Repeat for remaining sockets. J Note: Never touch a halogen light bulb with your bare skin, even when removing the bulb from the package before installing. The oils on your skin will drastically shorten the lifespan of the bulb. H I 6a A G A 6b G 6. Hook crystal strings (A-B-C-D) onto moutning surface (G). Note: For best appearance hang crystals in order as shown on diagram 6b.
CARE AND MAINTENANCE • Always be certain that electric current is turned off before cleaning this item. • Use a soft, moist cloth with mild non-abrasive soap to clean fixture. Never use glass cleaner on fixture, as it will damage the metal finish. • All glass shades may be washed in a towel-lined sink with warm water and mild soap. Do not wash shades in an automatic dishwasher. TROUBLESHOOTING PROBLEM Fixture does not light. POSSIBLE CAUSE CORRECTIVE ACTION 1. Fixture may be wired incorrectly. 1.
WARRANTY This warranty does not apply to any products that have been subjected to misuse, mishandling, misapplication, connected to voltage at more than 5% above standard North American voltage, unusual use (including but not limited to use in an environment where the annual average ambient operating temperature is below 27 or above 95 degrees Fahrenheit), neglect (including but not limited to improper maintenance), accident, acts of god such as high winds, improper installation or care, failure to follow t
REPLACEMENT PARTS LIST For replacement parts, call our customer service department at 1-855-226-7169, 8 a.m. - 4 p.m., EST, Monday - Friday. PART A B C D F I AA BB CC A B C DESCRIPTION 6-Bead Crystal String 7-Bead Crystal String 8-Bead Crystal String 9-Bead Crystal String Mounting Bracket Bulb Cover Wire Connector Short Machine Screw Canopy Screw PART # 6BCS83568 7BCS83568 8BCS83568 9BCS83568 XBAR83571 BC001 WC001 SCR832X050 CS83568 D I F AA BB CC Printed in China Rev.
LUMINAIRE POUR MEUBLE-LAVABO MODÈLE #83571 JOIGNEZ VOTRE REÇU ICI Numéro de série Date d’achat Des questions, des problèmes, des pièces manquantes? Avant de retourner l’article au détaillant, appelez notre service à la clientèle au 1 855 226-7169, entre 8 h et 16 h (HNE), du lundi au vendredi.
CONTENU DE L’EMBALLAGE E G A B C D F J H I PIÈCE A B C D E DESCRIPTION Guirlande de cristaux à 6 perles Guirlande de cristaux à 7 perles Guirlande de cristaux à 8 perles Guirlande de cristaux à 9 perles Pavillon QTÈ 6 6 6 6 1 PIÈCE F G H I J 11 DESCRIPTION Support de fixation Surface de montage Ampoule G9 40 watts Cache-ampoule Douille QTÈ 1 1 5 5 5
QUINCAILLERIE INCLUSE AA BB Capuchon de connexion Vis à Qté : 3 métaux courtes Qté : 2 DD CC Vis du pavillon Qté : 4 EE Pièce d’ancrageVis à pièce d’ancrage Qté : 4 Qté : 4 CONSIGNES DE SÉCURITÉ Veuillez vous assurer de lire et de comprendre l’intégralité du présent guide avant d’assembler, d’utiliser ou d’installer ce produit. • • • • • AVERTISSEMENT IMPORTANT : NE tentez JAMAIS de travailler sans couper l'électricité.
INSTRUCTIONS POUR L'ASSEMBLAGE 1. Placez temporairement le pavillon (F) contre le mur. Marquez les emplacements des ancrages (DD). Utilisez une perceuse équipée d'un foret de 9/32 po afin de percer les trous pour les ancrages (DD). Insérez les ancrages (DD) dans les trous. 1 Mur F Quincaillerie utilisée DD Ancrage x4 DD 2. Fixez le support de fixation (F) à la boîte de sortie à l'aide des vis à métaux courtes (BB). 2 Boîte de sortie Bras BB Quincaillerie utilisée BB Vis à métaux courtes F x2 3.
INSTRUCTIONS POUR L'ASSEMBLAGE 4. Guide de raccordement électrique 4 Fil de mise à la terre : • Pour une installation aux États-Unis : enroulez le fil de mise à la terre provenant de la boîte de sortie autour de la vis de mise à la terre située sur le support de fixation (F), à au moins 5,08 cm de l’extrémité du fil. Serrez la vis de mise à la terre.
INSTRUCTIONS POUR L'ASSEMBLAGE 6. Insérez quatre ampoules G9 de 40 watts (H) dans les douilles (J). Vissez les cache-ampoules (I) sur les douilles (J). 6 J Répétez l'opération pour les douilles restantes. Remarque: Ne touchez jamais une ampoulehalogène avec votre peau nue, même lorsque vous retirez l’ampoule de son emballage avant de l’installer. Les huiles que contient votre peau raccourciraient considérablement la durée de vie de l’ampoule. H I 6a A G A 6b G 6.
ENTRETIEN • Vérifiez toujours que le courant est coupé avant de nettoyer le luminaire. • Utilisez un linge doux et humide ainsi qu’un savon non abrasif. N’utilisez jamais de nettoyants pour vitres; vous risqueriez d’endommager le fini métallique du luminaire. • Les abat-jour en verre peuvent être nettoyés dans un évier couvert de serviettes, à l’aide d’eau tiède et de savon doux. Ne nettoyez pas les abat-jour dans un lave-vaisselle. DÉPANNAGE PROBLÈME Le luminaire ne s’allume pas. CAUSE POSSIBLE 1.
GARANTIE Cette garantie ne s'applique pas aux produits qui ont été soumis à un usage abusif, une manipulation inadéquate, un usage impropre, qui ont été connectés à un voltage de plus de 5 % supérieur au voltage nord américain, qui ont subi un usage inhabituel (y compris mais sans s'y limiter un usage dans un environnement où la température ambiante moyenne annuelle est inférieure à 27 °F [-2,8 °C] ou supérieure à 95 °F [35 °C]), la négligence (y compris mais sans s'y limiter un mauvais entretien), un accid
LISTE DES PIÈCES DE RECHANGE Pour obtenir des pièces de rechange, appelez notre service à la clientèle au 1 855 226-7169, entre 8 h et 16 h (HNE), du lundi au vendredi.