LED FLUSHMOUNT CEILING FIXTURE MODEL #83712 Français p. 8 ATTACH YOUR RECEIPT HERE Serial Number Purchase Date Questions, problems, missing parts? Before returning to your retailer, call our customer service department at 1-855-226-7169, 8 a.m. - 4 p.m., EST, Monday - Friday.
PACKAGE CONTENTS B A C D PART A B C D DESCRIPTION Canopy Mounting Bracket LED Assembly Shade 2 QUANTITY 1 1 1 1
HARDWARE CONTENTS AA Wire Connector Qty: 3 BB Short Machine Screw Qty: 2 CC DD EE FF Threaded Knob Qty: 4 Thumbscrew Qty: 4 Anchor Qty: 4 Anchor Screw Qty: 4 SAFETY INFORMATION Please read and understand this entire manual before attempting to assemble, operate or install the product. • • • • • • WARNING IMPORTANT: NEVER attempt any work without shutting off the electricity. Go to the main fuse box, or circuit breaker, in your home.
PREPARATION Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list. If any part is missing or damaged, do not attempt to assemble the product. Estimated assembly time: 30 minutes to 1 hour Tools Required for Assembly (not included): Phillips screwdriver, flathead screwdriver, wire strippers, electrical tape, ladder, safety glasses. ASSEMBLY INSTRUCTIONS 1. Temporarily raise mounting bracket (B) to ceiling. Mark location for anchor (DD).
ASSEMBLY INSTRUCTIONS 4. Wire connection guide: Ground wire: 4 • For installation in the United States: Wrap ground wire from outlet box around ground screw preassembled on mounting bracket (B) no less than 2 in. from wire end. Tighten ground screw. If fixture is supplied with a ground wire, connect to outlet ground wire with a wire connector (AA). • For installation in Canada: If fixture is supplied with ground wire, wrap ground wire around ground screw on mounting bracket (B). Tighten ground screw.
ASSEMBLY INSTRUCTIONS 6. Raise shade (D) to canopy (A) and secure with thumbscrews (FF). 6 A Hardware Used FF x4 Thumbscrew FF D CARE AND MAINTENANCE • Always be certain that electric current is turned off before cleaning this item. • Use a soft, moist cloth with mild non-abrasive soap to clean fixture. Never use glass cleaner on fixture, as it will damage the metal finish. TROUBLESHOOTING PROBLEM POSSIBLE CAUSE 1.CORRECTIVE Check wiring. ACTION Fixture does not light. 1.
WARRANTY élan Lighting warrants that its products will be free from defects in material and workmanship for three (3) year from the date of purchase by the Original Purchaser. LED Rail, LED Lanterns. LED Wall Sconces, LED Pendants and LED Chandeliers for single family residences are warranted for three (3) year on the Light Engine and all other electrical components.
REPLACEMENT PARTS LIST For replacement parts, call our customer service department at 1-855-226-7169, 8 a.m. - 4 p.m., EST, Monday - Friday. PART B AA BB CC DD EE FF DESCRIPTION Mounting Bracket Wire Connector Short Machine Screw Threaded Knob Anchor Anchor Screw Thumbscrew B AA PART # XBAR83712 WC001 SCR832X050 KLFK-CH AB001 AS001 TS83712 BB CC DD EE FF Printed in China Rev.
PLAFONNIER ENCASTRÉ À DEL MODÈLE #83712 JOIGNEZ VOTRE REÇU ICI Numéro de série Date d’achat Des questions, des problèmes, des pièces manquantes? Avant de retourner l’article au détaillant, appelez notre service à la clientèle au 1 855 226-7169, entre 8 h et 16 h (HNE), du lundi au vendredi.
CONTENU DE L’EMBALLAGE B A C D PIÈCE A B C D DESCRIPTION Pavillon Support de fixation Ensemble DEL Abat-jour 9 QUANTITÉ 1 1 1 1
QUINCAILLERIE INCLUSE AA BB Capuchon de connexion Vis à Qté : 3 métaux courte Qté : 2 CC DD EE Bouton fileté Qté : 4 FF Vis manuelle Qté : 4 Ancrage Qté : 4 Vis de l'ancrage Qté : 4 CONSIGNES DE SÉCURITÉ Veuillez vous assurer de lire et de comprendre l’intégralité du présent guide avant d’assembler, d’utiliser ou d’installer ce produit. AVERTISSEMENT • IMPORTANT : Ne faites JAMAIS de travail sans couper l'électricité.
PRÉPARATION Avant de commencer l’assemblage du produit, assurez-vous que toutes les pièces sont présentes. Comparez les pièces avec la liste du contenu de l’emballage et la liste de la quincaillerie. En cas de pièces manquantes ou endommagées, ne tentez pas d’assembler le produit. Temps d’assemblage approximatif : de 30 à 60 minutes. Outils nécessaires pour l’assemblage (non inclus) : tournevis cruciforme, tournevis à tête plate, pinces à dénuder, ruban isolant, escabeau, lunettes de sécurité.
INSTRUCTIONS POUR L'ASSEMBLAGE 4. Guide de raccordement électrique Fil de mise à la terre : • Pour une installation aux États-Unis : enroulez le fil de mise à la terre provenant de la boîte de sortie autour de la vis de mise à la terre située sur le support de fixation (I), à au moins 5,08 cm de l’extrémité du fil. Serrez la vis de mise à la terre. Si le luminaire est fourni avec un fil de mise à la terre, raccordez-le au fil de mise à la terre de la boîte de sortie à l’aide d’un connecteur de fils (AA).
INSTRUCTIONS POUR L'ASSEMBLAGE 6. Soulever abat-jour (C) à la pavillon (A) et le fixer avec vis manuelle (FF). 6 A Quincaillerie utilisée FF Vis manuelle x4 FF D ENTRETIEN • Vérifiez toujours que le courant est coupé avant de nettoyer le luminaire. • Utilisez un linge doux et humide ainsi qu’un savon non abrasif. N’utilisez jamais de nettoyants pour vitres; vous risqueriez d’endommager le fini métallique du luminaire. DÉPANNAGE PROBLÈME Le luminaire ne s’allume pas. CAUSE POSSIBLE 1.
GARANTIE élan Lighting garantit que ses produits seront libres de tout vice de fabrication ou défaut matériel pendant un (3) an à compter de la date d'achat par l'acheteur initial. Rails à DEL, lanternes à DEL. Les appliques à DEL, les suspensions à DEL et les lustres à DEL utilisés dans une résidence familiale unique sont garantis pendant un (3) an en ce qui concerne le moteur lumière et tous les autres composants électriques.
LISTE DES PIÈCES DE RECHANGE Pour obtenir des pièces de rechange, appelez notre service à la clientèle au 1 855 226-7169, entre 8 h et 16 h (HNE), du lundi au vendredi. PIÈCE Nº DE PIÈCE DESCRIPTION Support de fixation Capuchon de connexion Vis à métaux courte Bouton fileté Ancrage Vis de l'ancrage Vis manuelle B AA BB CC DD EE FF B AA XBAR83712 WC001 SCR832X050 KLFK-CH AB001 AS001 TS83712 BB CC DD EE FF Imprimé en Chine Rev.