Installation manual

Maintenance
Cleaning the condensate receptacle
Cleaning and refilling the syphon
Inspection of combustion chamber
22
5
6
7
Cleaning the condensate receptacle
• Disconnect the plug of the fluegas
temperature sensor (1);
• Remove the internal fluegas pipe (2)
of the boiler in order to create access
to the condensate receptacle;
• Clean the receptacle (3);
• Mount the fluegas pipe back in
position when the cleaning is finished;
• Connect the plug of the fluegas
temperature sensor.
Inspection of combustion chamber
The inspection opening is positioned on
the left hand side of the boiler.
• Remove the radiation panel (5) from
the heat exchanger;
• Remove the cover (6) from the
inspection opening;
• Inspect the combustion chamber (7),
clean if necessary;
• Mount the cover and radiation panel
back in original position.
Cleaning and refilling the syphon
• Remove the syphon (4) from the
condensate connection;
• Clean and fill it with fresh water;
• Mount the syphon back in the original
position.
4
1
3
2