User Manual

6
PROPER USE OF THE FREEZER
PLACEMENT
Before use, remove all packing materials from inside and outside of the
freezer. Tear off any protective film on the door or freezer body.
Keep away from heat and avoid direct sunlight. Do not place the freezer in
damp places to prevent rust or reduction of the insulating effect.
Do not spray or wash the freezer; do not put the freezer in places where it
may be splashed with water so as not to affect its electrical insulation
properties.
The freezer is to be placed in a well-ventilated indoor place. To ensure
adequate ventilation the top must not be covered and at least 70cm left above
the appliance for ventilation / opening of the lid. At least 20cm must be left to
both sides and the rear for ventilation. In addition the ground shall be flat, and
sturdy.
PRECAUTIONS BEFORE INSTALLATION OR ADJUSTMENT
• Information in the Instruction Manual is only for reference. The physical
product may differ.
• Before installation and adjusting of accessories, ensure that the freezer is
disconnected from the power.
STARTING
• Before initial use, keep the freezer still for 30 minutes before connecting it
to a power supply.
• Before putting any food into the unit, the freezer should be left to run for
2-3 hours, or for above 4 hours in summer when the ambient temperature
is high.