User Manual

MAINTENANCE AND CARE

Please unplug the appliance before cleaning, maintenance or defrosting is

carried out. During cleaning it is advised that all removable parts are taken

from the appliance and cleaned separately to allow access to all gaps and

crevices within the appliance.

OVERALL CLEANING

• Dust behind the refrigerator and on the ground should be cleaned regularly

to improve the cooling effect and reduce energy usage.

• The interior of the refrigerator should be cleaned regularly to avoid odours.

• Soft towels or a sponge dipped in water and non-corrosive neutral

detergents are suggested for cleaning.

• The appliance should be cleaned with clean water and a cloth.

• Following cleaning the surfaces should be wiped dry.

• Door seals should be regularly checked for damage and cleanliness and

cleaned with mild soap and water.

• Open the door to allow natural drying before the power is turned back on.

• Do not use hard brushes, steel balls, wire brushes, abrasives, such as

toothpastes, organic solvents (such as alcohol, acetone, banana oil, etc.),

boiling water, acid or alkaline items to clean the appliance as this could

damage its surface and interior.

• For areas that are difficult to clean within the appliance, such as narrow

gaps and corners, it is recommended to wipe them regularly with a soft

cloth or brush.

• Do not rinse with water so as not to affect the electrical insulation

properties.

DEFROSTING

Frost formed due to change of season or temperature may also be manually

removed by disconnecting the appliance from the power supply or by wiping

with a dry towel.