User Manual

MAINTENANCE

To enjoy years of outstanding performance from your heater, make sure you perform the following maintenance

activities on a regular basis:

• Keep exterior surfaces clean.

• Use warm soapy water for cleaning. Never use flammable or corrosive cleaning agents.

• While washing your unit, be sure to keep the area around the burner and pilot assembly dry at all times. If

the gas control is exposed to water in any way, DO NOT try to use it. It must be replaced.

• Airflow must be unobstructed. Keep controls, burner and circulation air passageways clean. Signs of

possible blockage include:

• Gas odour with extreme yellow tipping of flame.

• Heater does NOT reach the desired temperature.

• Heater glow is excessively uneven.

• Heater makes popping noises.

• Spiders and insects can nest in burner or orifices. This dangerous condition can damage the heater and

render it unsafe for use. Clean burner holes by using a heavy-duty pipe cleaner. Compressed air may help

clear away smaller particles.

• Carbon deposits may create a fire hazard. If any carbon deposits develop, clean the dome and burner with

warm soapy water.

Note: In environments with a high salt content (such as near the sea), corrosion occurs more quickly

than normal. Frequently check the corroded areas and repair them.

SERVICING

• Please consult your supplier for servicing this appliance and replacement of its parts. The servicing of the

appliance shall be carried out only by authorised personnel.

• Do not use unauthorised parts or components for this appliance, only use original equipment replacement

parts and components. The use of unauthorised parts or components will void the warranty and can create

unsafe condition.

STORAGE

There is no limitation on the storage of the appliance indoors provided that the cylinder is disconnected

and removed from the appliance.

Between uses or before storage:

• Turn the control dial OFF

• Turn the gas cylinder OFF

• Disconnect the gas bottle.

Store the heater upright in an area sheltered from direct contact with inclement weather (such as rain, sleet, hail,

snow, dust and debris). If desired, cover to protect exterior surfaces and to prevent build up in air passages.

Note: Wait until heater is cool before covering.