User Manual

3
IMPORTANT SAFETY INFORMATION
Please read this user manual before using this heater and keep it safe for future
reference.
Read the following instructions carefully and be sure your patio heater is properly
installed, assembled and cared for. Retain the instructions for future reference.
Failure to follow these instructions may result in serious bodily injury and/or
property damage.
WARNING - Risk of Suffocation! Gas heaters must be used outdoors and must
not be used in enclosed areas such as sheds or marquees!
Read the instruction manual before using the appliance.
WARNING: Accessible parts may be very hot. Keep young children away.
This appliance must be kept away from flammable materials during use.
Do not move the appliance during use.
The appliance should be secured to the ground when in use.
Turn off the gas supply at the gas cylinder after use.
Do not modify this appliance.
If you have any questions concerning assembly or operation, consult the retailer
or Bottled Gas Company.
Always place the appliance and cylinder on flat level ground.
Turn off the gas cylinder if gas leak is suspected.
Parts sealed by the manufacturer must not be altered by the user. No
modifications should be made to any part of this heater and repairs and
maintenance should only be carried out by a registered Gas Safe service
engineer.
Use only regulator and hose approved for LP Gas at the correct pressures and
gas type.
The regulator should comply with the standard EN16129 and current regulations
in the country where it is installed, which may be found at your nearest retailer of
gas items.
Refer to the technical data. It is strictly prohibited to use adjustable pressure.
The life expectancy of the regulator is estimated as 10 years. It is recommended
that the regulator is changed within 10 years of the date of manufacture or the
national conditions require it.
The type of replaceable hose should be compliant with EN16436-1.
The hose used must conform to the relevant standard for the country of use. The
length of the hose must be 0.7 meters (minimum) and 1.5 meters (maximum). A
worn or damaged hose must be replaced. Ensure that the hose is not obstructed
or kinked. It is recommended that the hose is changed within 1 year of the date
of manufacture or as the national conditions require.