Instruction Manual

11
OPERATION
The product has number of different cleaning modes to cater for different cleaning
needs. The cleaning mode can be chosen on the robot host, on the remote control or on
the app.
AUTOMATIC
CLEANING
The robot will scan the immediate environment and generate a
map. It will then partition the map and create a cleaning path, first
of all cleaning around the perimeter and then filling in the shape
with S-shape cleaning patterns. Each partition is then cleaned in
turn in a systematic, efficient manner.
To activate: with the host in standby mode, switch on the power.
After hearing the robot voice prompt, press the start button or
press “ ” on the remote control or in the app. The robot will then
start to clean.
PARTIAL
CLEANING
This mode is useful where there is cleaning required concentrated
on one area. With the robot on standby/suspend, press the partial
cleaning button and the robot will clean within a 1.5m square area
based on its starting position. After cleaning the robot will return
to the start position.
To activate: press the partial cleaning button in the app or on the
remote:
ZONED
CLEANING
Use the app to enter Zoned Cleaning mode. The robot will clean
zones as directed by input on your phone.
DESIGNATED
SPOT
Use the app to specify a target point on the map to clean. The
robot will go to the designated place automatically.
SUCTION
ADJUSTMENT
Press the button on the remote control or in the app to
adjust suction levels.
MANUAL
CONTROL
Press the direction buttons in the app or on the remote control to
control the robot’s movement forwards, backwards, left and right.
VIRTUAL
WALL
To activate: press Virtual Wall in the app to draw a virtual wall on
the map which the robot must not cross.
PAUSE
During operation of the host robot press the host “Start” button or
the pause button on the remote / app.
WAKE UP
After three minutes of inactivity, the robot goes into sleep mode
and all indicators turn off. You can use any buttons on the robot
or app to wake it up. If it has been inactive for more than 20
minutes, on the Start and Go Home buttons can wake it.
SHUT DOWN
After the robot has completed its task and come to rest, press the
main power switch at the side of the robot to shut down.
Note: it is recommended that after the robot has completed its
task, it is returned to the charging station to fully recharge the
battery. It not in use for a long time, then it can be shut down.