Instruction Manual

14
ADD DEVICE
4. At the Device screen select
the + symbol to add a
device.
5. You will now be prompted to
scan the QR code which is
located on the underside of
your robot.
6. Now select your Wi-Fi
network from the list and
enter your Wi-Fi password.
7. Reset the device by
pressing the power switch.
After restarting, press and
hold the device button3-5
seconds. The device will
make a confirmation tone.
Click next on your phone.
Note: do not attempt to
connect from the charging
base.Make sure that after
the long press a network
prompt tone is received.
8. Now the phone, robot and
router will build a connection
to each other.
9. Confirm the message below.