User manual

870 mm
820 mm
Before installing the appliance between
units, adjust the height of the feet and
rear wheels. The wheels are factory set
for a height of 820 mm. To align the ap-
pliance to a height of 870 mm, raise it by
adjusting the feet with a spanner, then
remove the wheels and refit them in the
lowest position.
7.4 Fitting the side panels
820 mm
1015 mm
539 mm
541 mm
30 mm
64 mm
280 mm
15 mm
17.5 mm
B
A
260* mm
15 mm
C
Fit the brackets onto the panels in the
positions shown in the diagram. The di-
mension of 260* mm is allowed for fitting
a 100 mm plinth below the panel. For
different plinth sizes, increase the dimen-
sion of 260* mm accordingly.
1.
Rear edge
2.
Front edge
3.
Right hand side panel
ENGLISH 15