ÖKO-LAVAMAT LAVALOGIC 1610 Washing Machine User information
Dear Customer, Please read this user information carefully and keep it to refer to later. Please pass the user information on to any future owner of the appliance. 1 3 2 2 The following symbols are used in the text: Safety instructions Warning! Information that affects your personal safety. Important! Information that prevents damage to the appliance.
Contents Operating Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Disposal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Switching on the appliance for the first time – setting the language 7 Description of the appliance . . . . . . . . . . . . . . . . . . . . . . . . . .
Child safety device. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25 Cleaning and care . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26 What to do if... . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Remedying small malfunctions yourself . . . . . . . . . . . . . . . . . . . . . . . . . . . . . If the wash result is not satisfactory . . . . . . . . . . . . . . . . . .
Operating Instructions 1 Safety Prior to using the appliance for the first time • Follow the “Installation and connection instructions”. • If the appliance is delivered in the winter months when there are minus temperatures: store the washing machine at room temperature for 24 hours before using for the first time. Correct use • The washing machine is only designed for the washing of normal domestic laundry at home. • Additions or modifications to the washing machine are not permitted.
• Switch off the washing machine prior to cleaning it and carrying out maintenance. In addition, remove the power plug from the power point or – if the appliance has been hard-wired – switch off the cutout in the fuse box or completely remove the fuse. • If operation is stopped, disconnect the appliance from the mains supply and turn off the tap. • Never remove the power plug from the power point by pulling on the cable. Always pull the plug.
Switching on the appliance for the first time – setting the language When switching on the appliance for the first time you should be sure to set the language in which you want the indicators in the display to appear. 1. Press the control knob. The appliance is now switched on. The languages that can be chosen will appear in the display. In the factory the language is preset to German. Important: If the display is not showing any languages, the appliance has been switched on before.
Description of the appliance Control panel with display Drawer for detergent and conditioner Rating plate (behind door) Door Screw feet (height adjustable); rear left: automatically adjusting foot Drain pump cover Control panel with display LINEN/EASY-C. 60°C 1600 RPM START 60° Buttons 1600 OPTIONS 10:17-12:16 î LINEN/EASY-C.
Main control features Control knob Switching the appliance on and off Press the control knob to switch the appliance on and off. Highlighting You can highlight the entries on the right of the display by turning the control knob. WOOLLENS 40°C 1200 RPM START 40° 1200 OPTIONS 10:17-10:54 î LINEN/EASY-C. ENERGY SAVING COTTONS DELICATES WOOLLENS ) Cancelling settings If you would like to cancel settings that have been made by mistake, switch the appliance off and on again using the control knob.
Programme overview DELAY START SENSITIVE STAIN PRE WASH 1600 1400 1200 1000/800/600/400 RINSE HOLD Spin speed VERY QUICK Options • • • •2) • • • • • • • • • • • • • • • • • • • • • • • • • • • •2) • • • • • • • • 1kg • • • • LINGERIE 40 1kg • • • • 40 -60 MIX 6kg • • • • EASY IRON 60, 50, 40, 30, COLD 1kg • • • REFRESH 30 3kg • • • FASHION 40 3kg • • • max.
Use/Features Caresymbols1) General programme for coloured and easy-care items made of cotton/linen as well as for easy-care mixed fibres and synthetics. The wash programme is adjusted according to the different fabric types and load sizes. If loading only with easy-care washing, do not load more than 3 kg. IKN JM Energy-saving and water-saving programme which washes at 60°C for lightly to normally soiled whites/coloureds made of cotton/linen.
• • • • • • • • 3kg • SPIN 6kg • • STARCH 6kg • • • 1) A 10 litre bucket contains approximately 2.5 kg of dry washing (cotton). 1400 1600 PRE WASH SHORT SPIN DRAIN 12 STAIN SENSITIVE DELAY START VERY QUICK QUICK Programme max.
Use/Features Drain and short spin after a rinse hold, or separate short spin of handwashed delicates, woollens, silk. Drain and spin, e.g. after a rinse hold, or separate spin for hand-washed cottons/ linens and easy-cares. Separate starching, conditioning, stiffening, treating of damp washing. Caresymbols1) IKN QLH JMO JMO Draining of the water after a rinse hold. 1) The figures in the care symbols indicate the maximum temperatures.
Before the first wash Setting the time So that the current time and the end of the programme are correctly displayed, please check the display and set the current time, if necessary. (See “Setting extra options: Timer”.) Carrying out a wash programme prior to first use Before doing your first wash, run a washing cycle without any washing in the machine (programme LINEN/EASY-C. 60°, option TIME SAVING/ VERY QUICK, use approx. 1/4 measuring cup of washing powder).
Running a wash cycle Switching on the appliance 3 Press the control knob. The appliance is now switched on. Before switching the appliance on, make sure that the drum is empty. If you do not, the washing will subsequently not be registered properly by the load sensor. Setting a programme 5. Highlight the desired programme, e.g. DELICATES. DELICATES 40°C 1200 RPM 11:25-12:36 î START 40° 1200 OPTIONS LINEN/EASY-C. ENERGY SAVING COTTONS DELICATES) WOOLLENS Changing the temperature 6.
3 RINSE HOLD means: the washing is left to soak in the last rinse water and is not spun. If required, set options. Selecting options You can select different options on top of the programme that has been selected. Only options that can be combined with the programme that has already been selected will be offered. TIME SAVING DELAY START SENSITIVE STAIN PRE WASH Shortened wash programme for more lightly soiled washing. The start of a programme can be delayed in steps of 30 minutes to a max. of 20 hours.
DELAY START 1. Press the OPTIONS key. 2. Use the control knob to highlight DELAY START. 3. Press the SELECT key. 4. Use the control knob to DELICATES 30°C 1000 RPM 11:25-14:06 highlight the time at which è the programme is to end. END OF PROGRAMME SELECT 5. Press the SELECT key. The 14:06 H:MIN ( BACK programme end time will change in the information panel. 6. Press the START key. Cancelling DELAY START: Press the START key again. The wash programme will start immediately. SENSITIVE/STAIN/PRE WASH 1.
Opening the door/Loading the washing 1. To open the door: carefully pull the handle on the door. 2. Unfold the washing and load it loosely into the machine. Mix large and small items. Important: Do not get any washing caught between the door and the rubber seal. 3. Push the door firmly shut.
Adding detergent/conditioner Important: Only use detergents/conditioners that are suitable for use in domestic washing machines. Add detergent/conditioner in accordance with the detergent/conditioner manufacturer’s instructions. Observe instructions on the packaging. The amount of detergent used depends on: – the washing’s degree of soiling, – the load size – the hardness of the tap water. Water softener should be used from water hardness range 2 (=medium).
Starting a programme 1. Check that the water tap is open. 2. Press the START key. The wash cycle is started. DELICATES 30°C 1000 RPM 11:25-12:36 î START 30° 1000 OPTIONS LINEN/EASY-C. ENERGY SAVING COTTONS DELICATES) WOOLLENS Programme progress While the programme is DELICATES 30°C 1000 RPM 11:25-12:36 running, the display shows § PAUSE among other things: MAIN WASH – each stage of the pro###############=========] gramme as it progresses, 1000 MOISTURE 50 % e.g.
Washing cycle complete/Removing the washing At the end of the programme PLEASE TAKE OUT THE CLOTHES appears in the display. As soon as the § symbol appears, the door can be opened. 1. Open the door using the handle. 2. Remove the washing. 3. Close the water tap. 4. Switch off the appliance. If Rinse Hold has been selected: 1. Press the START key. DELICATES 30°C RINSE HOLD 11:28-11:28 § START RINSE HOLD ###################### RINSE H. The display automatically changes to the first programme page.
Setting extra options Independent of any programme you can set different basic settings. These basic settings will permanently remain active until they are deselected again. MEMORY 1, 2, 3, 4 RINSE+ GENTLE SPIN LANGUAGE TIMER VOLUME Frequently used programme settings can be stored. The stored programme setting can then be selected like a normal programme. There are a total of four memory positions available.
4. Highlight the SENSITIVE option. 5. Press the SELECT key. The symbol will appear in the display. LINEN/EASY-C. 40°C 1200 RPM 10:17-12:16 ç START TIME SAVING DELAY START SENSITIVE) STAIN PRE WASH SELECT BACK EXTRAS 6. Press the EXTRAS key. MEMORY is highlighted: 7. Press the SELECT key. EXTRAS ì SELECT MEMORY( RINSE+ GENTLE SPIN. LANGUAGE BACK If MEMORY 1 is highlighted: 8. Press the SAVE key. The programme setting is stored as M1: LINEN/EASY-C. 9. Then press the BACK key 3 times.
RINSE+, GENTLE SPIN 1. Press the OPTIONS key. 2. Press the EXTRAS key. 3. Use the control knob to highlight the desired Extra, e.g. RINSE+. 4. Press the SELECT key. The symbol appears in the display. 5. Press the BACK key twice. EXTRAS ì SELECT MEMORY RINSE +) GENTLE SPIN LANGUAGE BACK LANGUAGE 1. Press the OPTIONS key. 2. Press the EXTRAS key. 3. Use the control knob to highlight LANGUAGE. 4. Press the SELECT key. 5. Use the control knob to highlight the desired language, e.g. ENGLISH. 6.
VOLUME 1. Press the OPTIONS key. 2. Press the EXTRAS key. 3. Use the control knob to highlight VOLUME. 4. Press the SELECT key. 5. Use the control knob to highlight OFF, NORMAL or LOUD. 6. Press the SELECT key. 7. Press the BACK key 3 times. EXTRAS VOLUME é SELECT BACK OFF§§§ NORMAL!) LOUD§§§ Child safety device If the child safety device has been activated, the door can no longer be shut.
Cleaning and care Important: Do not use furniture cleaning products or aggressive cleaning agents to clean the appliance. Wipe over the control panel and housing with a damp cloth. Detergent drawer The detergent drawer should be cleaned regularly. 1. Remove the detergent drawer by pulling firmly. 2. Remove the softener insert from the middle compartment. 3. Clean all parts with water. 4. Place the softener insert in as far as it will go, so that it is firmly in position. 5.
What to do if... Remedying small malfunctions yourself If one of the following fault messages is shown in the display during operation: – ATTENTION (E41)/PLEASE CLOSE THE DOOR – ATTENTION ERROR CODE (E11)/PLEASE OPEN THE TAP – ATTENTION ERROR CODE (E21)/PLEASE CHECK THE WATER DRAINAGE please refer to the following table. After you have rectified the error, press the START key. If ATTENTION/PLEASE CALL YOUR LOCAL SERVICE FORCE together with an error code (e.g. E..
Problem Possible cause Remedy The transit packaging has not Removing the transit packbeen removed. aging. The washing machine vibrates when operating or is not stable. The screw feet not correctly adjusted. Adjust the feet as described in the installation and connection instructions. There is very little washing in This does not affect how the the drum (e.g. only one machine operates. bathrobe). The screw connection on the Screw the inlet hose in inlet hose is leaking. firmly.
Problem Water is not entering the appliance. ATTENTION ERROR CODE (E11)/PLEASE OPEN THE WATER TAP appears in the display. The washing has not been spun thoroughly and water remains visible in the drum. ATTENTION ERROR CODE (E21)/PLEASE CHECK THE WATER DRAINAGE appears in the display. Possible cause Tap turned off. Remedy Turn on the tap. Turn off the tap. Unscrew the The filter in the threaded inhose, take out the filter and let hose fitting is blocked. clean it.
Carrying out an emergency drain 1 Warning! Prior to carrying out an emergency drain, switch off the washing machine and remove the power plug from the power point. Warning! The water that comes out of the emergency drain hose may be hot. There is a risk of scalding. Let the water cool before performing an emergency drain! 1. Open the plinth flap and remove it. 2. Remove the emergency drain hose. 3. Place a shallow container underneath it.
Drain pump 1 The drain pump is maintenance-free. It is only necessary to open the pump cover if there is a malfunction and water is no longer being pumped out, e.g. if the pump wheel is blocked. Before loading the machine, please always ensure that there are no foreign bodies present in the pockets or in between the items to be washed. Paper clips, nails, etc.
Technical data 5 This appliance conforms with the following EU Directives: – 73/23/EEC dated 19.02.1973 Low Voltage Directive – 89/336/EEC dated 03.05.1989 EMC Directive inclusive of Amending Directive 92/31/EEC – 93/68/EEC dated 22.07.1993 CE Marking Directive Height x width x depth 850 x 598 x 640mm Depth when door is open 1,017 mm Height adjustability approx. +10/-5mm Load (depending on programme) max.
Installation and connection instructions 1 Safety information concerning installation • This washing machine cannot be built-in. • Before using for the first time, check the appliance for damage sustained while it was being transported. Do not under any circumstances connect an appliance that is damaged to the mains. In the event of damage to the appliance contact your supplier. • Be sure to remove all the components of the transit packaging before using the appliance for the first time.
Installing the appliance Transporting the appliance 1 Warning: The washing machine is very heavy. There is a risk of injury. Exercise care when lifting the appliance. • Do not lay the washing machine on its front nor on its right side (as seen from the front). Electrical components may get wet. • Never transport the appliance without using the transit packaging. Only remove the transit packaging when the appliance is in its place of installation.
3 Special spanner A and sealing caps B (2 units) and C (1 unit) come with the appliance. 3. Use special spanner A to remove screw D and the compression spring. 4. Use sealing cap C to cap the hole. 5. Use special spanner A to remove the two screws E. 6. Use special spanner A to remove the four screws F. 7. Remove transit bar G. 8. Screw in the four screws F again. 9. Use sealing caps B to cap the two large holes.
Making the appliance level 3 Automatic adjusting foot: The rear foot on the left-hand side of your washing machine is built as a shock absorbing foot. This guarantees that the appliance does not move even at high spin speeds. The four feet of the appliance are pre-adjusted. Large degrees of unevenness can be compensated for by adjusting the four feet of the appliance. Use the special spanner supplied to do this.
Should the plug need to be replaced for any reason, proceed as described below. The wires in the mains lead are coloured in accordance with the following code: 1 Green and Yellow: Earth Blue: Neutral Brown: Live • The wire coloured green and yellow must be connected to the terminal marked with the letter “E“ or by the earth symbol E or coloured green and yellow. • The wire coloured blue must be connected to the terminal “N“ or coloured black.
Connecting the appliance to the water supply Important: • This appliance must not be connected to the hot water supply. • When connecting the appliance, use only new hose kits. • Only connect the appliance to the drinking water supply. Rain water or water for industrial use may only be used if it fulfils the requirements of DIN1986 and DIN1988. • Do not kink or crush the water inlet hose or drain hose. Permitted water pressure The water pressure must be at least 1 bar (=10N/cm2 =0.
Water inlet 3 A 1.35m long pressure hose is supplied with the appliance. If a longer inlet hose is required, only hoses from the manufacturer are to be used. Your local Service Force stocks hose kits of different lengths. Sealing rings are either inserted in the plastic nuts of the threaded hose fitting or are included as spare parts. Do not use any other sealing rings. Important! All threaded hose fittings must only be tightened by hand. 1. Connect the hose with the right-angle connector to the machine.
Water Drainage The appliance drain hose should hook into a standpipe, the hook in the drain hose is formed using the plastic “U-Piece“ supplied. The standpipe should have an internal diameter of approximately 38 mm (see diagram) thus ensuring there is an air break between the drain hose and standpipe. Important! It is essential to lay the drainage hose without kinks. When discharging into a standpipe ensure that the top of the curve in the hose end is no more than 90 cm (35.4’’) and no less than 60 cm (23.
Pumping heights of over 1 metre The washing machine’s drain pump is able to pump water to a height of 1metre, calculated from the surface on which the appliance is installed. Important! If pumping height is over 1 metre malfunctions and damage to the appliance may arise. For pumping heights over 1metre a conversion kit can be obtained. Please contact Service Force Centre.
Warranty conditions Great Britain Standard guarantee conditions We, AEG, undertake that if within 12 months of the date of the purchase this AEG appliance or any part thereof is proved to be defective by reason only of faulty workmanship or materials, we will, at our discretion repair or replace the same FREE OF CHARGE for labour, materials or carriage on condition that: • The appliance has been correctly installed and used only on the electricity or gas supply stated on the rating plate.
Service and Spare Parts If the event of your appliance requiring service, or if you wish to purchase spare parts, please contact Service Force by telephoning: 0870 5 929 929 Your telephone call will be automatically routed to the Service Force Centre covering your post code area. For the address of your local Service Force Centre and further information about Service Force, please visit the website at www. serviceforce.co.
From the Electrolux Group. The world´s No.1 choice. The Electrolux Group is the world´s largest producer of powered appliances for kitchen, cleaning and outdoor use. More than 55 million Electrolux Group products (such as refrigerators, cookers, washing machines, vacuum cleaners, chain saws and lawn mowers) are sold each year to a value of approx. USD 14 billion in more than 150 countries around the world. AEG Hausgeräte GmbH Postfach 1036 D-90327 Nürnberg http://www.aeg.hausgeraete.
