Installation Instructions

DRAIN LINE INSTALLATION

• Connect drain line to air gap, waste tee or dis-

poser using either previously determined method.

Waste Tee Installation Disposer Installation

IMPORTANT – When connecting

drain line to disposer check to be sure that drain

plug has been removed. DISHWASHER WILL NOT

DRAIN IF PLUG IS LEFT IN PLACE.

TIP: Avoid unnecessary service call charges.

Always be sure disposer drain plug has been

removed before attaching deishwasher drain hose

to the disposer.

Method 1 - Air gap with waste tee or disposer

Figure W

Waste Tee Installation Disposer Installation

Figure X

STEP 12 CONNECT DRAIN LINE

FOLLOW ALL LOCAL CODES AND ORDINANCES

The drain hose molded end will fit 5/8", 3/4" or 1"

diameter connections on the air gap, waste tee or

disposer. Cut on the marked line as required for

your installation.

• If a longer drain hose is required, add up to 42"

of length for a total of 10 ft. to the factory in-

stalled hose. Use 5/8" or 7/8" inside diameter

hose and a coupler to connect the two hose

ends. Secure the connection with hose clamps.

• Secure the drain hose to the air gap, waste tee

or disposer with clamps.

NOTE: TOTAL DRAIN HOSE LENGTH MUST

NOT EXCEED 10 FEET FOR PROPTER DRAIN

OPERATION..

Method 2 - High Drain loop with waste tee or disposer