Installation Instructions

2
TOOLS YOU WILL NEED :
 Phillips head screwdriver
 5/16" and 1/4" nutdriver
 6" Adjustable wrench
 Level
 Carpenters square
 Measuring tape
 Safety Glasses
 Flashlight
 Bucket tocatch water when flushing
the line
 Gloves
FOR NEW INSTALLATIONS
ONLY:
 Tubing Cutter
 Drill and Appropriate Bits
 Hole Saw Set
Installation Preparation
PARTS SUPPLIED :
 Two #8 Phillips flat head wood screws, 5/8" long
to secure dishwasher to underside of countertop
(in literature package).
 Two Phillips head, color matched toekick screws
(in literature package).
MATERIALS YOU WILL NEED:
 Ferrule, compression nut and 90° Elbow (3/8"
NPT external thread on one end, opposite end
sized to fit water supply)
 Thread seal tape
 UL Listed wire nuts (3)
MATERIALS FOR NEW INSTALLA-
TIONS ONLY:
 Air gap for drain hose, if required
 Waste tee for house plumbing, if applicable
 Electrical cable or power cord, if applicable
 Screw type hose clamps
 Strain relief for electrical connections
 Hand shut-off valve
 Water line 3/8" min. copper
 Coupler for extending drain line, if applicable
90° Elbow,
Ferrule and
Compression
Nut
Wire Nuts (3)
Waste
Te e
Electrical Cable (or
Power Cord, if
applicable)
Hot Water Line
Screw Type
Hose Clamps
Coupler
Hand Shut-
off Valve
2 Wood
Screws
Hole Saw
Set
Ruban à
mesurer
Tubing
Cutter
Safety Glasses
6"
Adjustable
Wrench
Bucket
Flashlight
Gloves
Level
Thread Seal
Tape
Air Gap
Strain
Relief
2 Color Matched
Toekick Screws
Drill and Bits
1/4" and 5/16"
Nutdriver
Phillips
Head
Screwdriver
Carpenters
Square
Screw Type
Hose Clamp