Operator`s manual

A-61371 April 2010 1-9
Turning the power on
and off
To turn the power on:
• Press the power switch of the scanner to the (I) On position.
• Press the power switch of the printer to the (I) On position.
The indicators on the control panel light up and the system starts
the initialization operation. When the Wait symbol goes out, the
system is ready for printing.
NOTE: If you load the film in the Film Carrier and press Start while
the printer is warming up, you can scan and memorize the
film image of about 9 pages (letter or A4 size/400 dpi). The
printer allows that print process to be started as soon as the
printer completes warming up.
Both ends of the Exposure display blink. If you want this
function disabled, contact your Kodak Service
Representative.